airtrack-v2-documentation

Airtable part 1: Precut of the aluminium profile strut

This section provides information to precut the aluminium strut profile{Qty: 2} and labels the different parts based on length.

For cutting the struts a metall saw{Qty: 1, Cat:tool} is needed (see link for saw recommendation).

Pieces out of 2000mm aluminium strut profile #1

• Cut three pieces with a length of 450 mm out of one aluminium strut profile.

• You have now three [aluminium strut profiles (length: 450mm)]{output, Qty: 3}.

Pieces out of 2000mm aluminium strut profile #2

• Cut two pieces with a length of 480 mm out of one 2000 mm aluminium strut profile.

• Cut one pieces with a length of 150 mm out of the remaining 2000 mm aluminium strut profile.

• You have now two [aluminium strut profiles (length: 480mm)]{output, Qty: 2} and one [aluminium strut profiles (length: 150mm)]{output, Qty: 1}.